Description
Butyl rubber waterproof sealing tape is made of butyl rubber coated aluminum film,using the latest patented technology, through a special process produced by the environment-friendly solvent-free sealing adhesive material.It is a quick and effective method of sealing and repairing that produces a lasting protection in all climates.
1. Self-adhesive surface: Single-side tape and Double-side tape (Remark: Double-side tape cannot be exposed)
2. Covering material on single-side tapes: non-woven, aluminum foil, TPO film, others
Technical:
Thickness (mm)
|
0.8, 1.0, 1.2, 1.5, 2.0, 3.0, 4.0 or Customized
|
Width (cm)
|
5, 7.5, 10, 15, 20, 25 ... 100 or Customized
|
Length (m)
|
10, 15, 20 or Customized
|
Surface
|
Aluminum, Non-woven Fabric, HDPE etc
|
Material
|
Butyl
|
Properties
|
Test Result
|
Test Method
|
Specific Gravity Ib./gal (US)
|
15.4
|
ASTM D 792
|
Low Temperature Flexibility
|
No loss of adhesion or cracking
|
ASTM C 765
|
Weight Loss after Heat Aging
|
0.39
|
ASTM C 771
|
Oil Migration/Plasticizer Bleed-Out
|
Slight wetting on top.No bleed
|
ASTM C 772
|
Softness mm penetration
|
9.7
|
ASTM C 782
|
Tensile Adhesive Strength lb. force
|
34.0 MOF:Cohesive
|
ASTM C 907
|
Yield Strength, lb. force
|
8.0
|
ASTM C 908
|
Application:
l Roofs - around chimneys and skylights, over joints/ cracks in tiles and roof cladding.
l Exterior walls - joints and cracks in asbestos cement sheeting, cracks under masonry ties and anchorages, around wall penetrations (such as water pipes), gutters and down pipes.
l Terraces - at joints between terraces and exterior walls, joints in parapets, roof edges, sides, flashing and joints.
l Car industry, repairing of roof and cars.